'Print' gun plans posted online

2013-05-07 11:22
Demonstrators attend a rally and march to support federal and state gun control proposals in the Harlem district of New York City. (Picture: AFP)

Demonstrators attend a rally and march to support federal and state gun control proposals in the Harlem district of New York City. (Picture: AFP)

Multimedia   ·   User Galleries   ·   News in Pictures Send us your pictures  ·  Send us your stories

Washington - Computer files to create a handgun almost entirely from parts made with a 3D printer went online on Monday, alarming gun control advocates after it was successfully test-fired by its inventor.

The single-shot .380-calibre Liberator bears a vague resemblance to its namesake, the FP-45 Liberator pistol that the US developed during World War II to be air-dropped to French Resistance fighters.

Computer-aided design (CAD) files for the Liberator appeared on the website of Defence Distributed, a non-profit group that promotes the open-source development of firearms using 3D printers.

"We'll build the trigger first... Next, we'll build the hammer subassembly... Next, drop the hammer into the frame...," reads the accompanying set of instructions, which come in English and Chinese.

"Finally slide the grip on the frame and insert the grip pin. Your Liberator is now ready to go!"


For the Liberator to conform with US firearms law, the instructions call for a 2cm-big chunk of steel to be sealed with epoxy glue in front of the trigger guard, so that the weapon can be spotted by metal detectors.

The only other non-plastic part is a tiny nail that acts as the firing pin.

Business magazine Forbes posted a video of the Liberator being remotely test-fired outside Austin, Texas last week, with a yellow string tied to the trigger of the toy-like white-and-blue handgun.

"The verdict: it worked," Forbes reported, adding however that the Liberator exploded ("sending shards of white ABS plastic flying into the weeds") when its inventor Cody Wilson attempted a second test using a rifle cartridge.

"I feel no sense of achievement," the 25-year-old University of Texas law student told Forbes. "There's a lot of work to be done."

CAD files for gun parts have been available on the internet for some time, but the Liberator is apparently the first entire weapon ever to be fabricated almost exclusively with parts created with 3D printing technology.

Supporters of tougher gun laws in the US - where there are nearly as many guns (an estimated 300 million) as there are people (about 315 million) and more than 30 000 gun-related deaths a year - expressed alarm.


"Stomach-churning," said Senator Charles Schumer of New York. "Now anyone - a terrorist, someone who is mentally ill, a spousal abuser, a felon - can essentially open a gun factory in their garage. It must be stopped."

In the House of Representatives, Congressman Steve Israel, also from New York, is sponsoring an Undetectable Firearms Modernisation Act to outlaw plastic homemade guns.

"Security checkpoints, background checks, and gun regulations will do little good if criminals can print plastic firearms at home and bring those firearms through metal detectors with no one the wiser," he said in a statement.

No longer prohibitively expensive, 3D printers can now be bought for about the same price as a top-end laptop computer. Brooklyn-based MakerBot, for instance, markets its desktop Replicator 2 for $2 199 with delivery in a week.

After the December 2012 massacre of 20 children at Sandy Hook elementary school in Newtown, Connecticut, MakerBot took down CAD files for semi-automatic rifle parts that gun enthusiasts had posted on its open-source 3D printing library.
Read more on:    technology

Join the conversation!

24.com encourages commentary submitted via MyNews24. Contributions of 200 words or more will be considered for publication.

We reserve editorial discretion to decide what will be published.
Read our comments policy for guidelines on contributions.

24.com publishes all comments posted on articles provided that they adhere to our Comments Policy. Should you wish to report a comment for editorial review, please do so by clicking the 'Report Comment' button to the right of each comment.

Comment on this story
Comments have been closed for this article.

Inside News24


Book flights

Compare, Book, Fly

Traffic Alerts
There are new stories on the homepage. Click here to see them.


Create Profile

Creating your profile will enable you to submit photos and stories to get published on News24.

Please provide a username for your profile page:

This username must be unique, cannot be edited and will be used in the URL to your profile page across the entire 24.com network.


Location Settings

News24 allows you to edit the display of certain components based on a location. If you wish to personalise the page based on your preferences, please select a location for each component and click "Submit" in order for the changes to take affect.

Facebook Sign-In

Hi News addict,

Join the News24 Community to be involved in breaking the news.

Log in with Facebook to comment and personalise news, weather and listings.