Publications
Alcolin Rapid Set Clear Epoxy has a high bond strength, dries in minutes and offers invisible glue lines. It can also be used for:
• Repairing small plastic figurines and costume jewellery.• Repairing broken casings on electronic equipment.
• It’s ideal for gluing small metal/wood/glass parts where clamping is not possible.
QUICK PROJECT GUIDE
Hard labour 1/10
Skill level 1/10
Time needed 20 minutes
YOU WILL NEED
• broken ceramic item (we fixed a jug)
• sandpaper
• acetone
• Alcolin Rapid Set Clear Epoxy
1 Lightly sand the surfaces to be repaired before cleaning to help ensure a good bond. Use acetone to clean the surfaces.
2 Mix the Alcolin Rapid Set Clear Epoxy according to the instructions on the packaging.
3 Apply the epoxy to both surfaces and apply pressure (initial setting time is 1–10 minutes and full cure is reached after 24 hours). The ear of our jug was broken in two pieces, so we attached these first.
Tip Remove any excess epoxy immediately with acetone.
4 Repeat steps 2–3 to attach the ear to the jug.
